QB/T 2755 Explained: China's Carpet-Tile Standard (2005 → 2024) and How to Use It When Buying

TL;DR

QB/T 2755 is China's light-industry standard for carpet tiles — and the letters matter. "QB/T" means a voluntary industry standard, not a GB national or mandatory one. As of 1 January 2026 the current edition is QB/T 2755-2024 "Block carpet", which replaced QB/T 2755-2005; any spec sheet still citing the 2005 edition is quoting a withdrawn standard. The standard covers classification, requirements, test methods, inspection, marking and packaging — it does not certify indoor-air emissions (that is the separate mandatory GB 18587) or fire performance. So treat "complies with QB/T 2755" as a quality baseline, then ask for a test report tied to the exact tile, citing the 2024 edition, plus separate evidence for emissions and fire.

Executive commercial interior with grey carpet tile and teal accents — the kind of specified project where a carpet standard is quoted on the tender

1. What QB/T 2755 is — and the letters that matter

On a Chinese carpet-tile quotation you will often see a line likecomplies with QB/T 2755”. It is worth knowing exactly what that claims, because the prefix carries as much information as the number.

QB/T 2755 is China's light-industry standard for carpet tiles. Broken into its parts: QB denotes the light-industry sector; the /T marks it as tuijian — recommended, meaning voluntary; and 2755 is the document number. It sets out how a carpet tile is classified, the requirements it should meet, the test methods used to check them, and the rules for inspection, marking, packaging, transport and storage.

The single most useful thing to understand is what the prefix is not: it is not a GB national standard, and it is not mandatory. That does not make it worthless — a voluntary industry standard is a perfectly good common baseline — but it means a QB/T 2755 claim is a statement about product quality conventions, not a statement about legal compliance or indoor-air safety. Those live elsewhere, as section 4 explains.

2. Where it sits in China's standards system

China's standards are tiered, and the prefix tells you both the tier and whether the standard is mandatory. The rule that repays learning once: a bare GB is mandatory; add /T and it becomes recommended. The same logic applies one tier down, which is why QB/T is a recommended industry standard.

GB / GB/TNational standardGB = mandatory · GB/T = recommendedQB/T · FZ · HG …Industry / sector standardQB/T 2755 lives here — recommendedDBLocal / provincial standardregion-specificT/Group / association standardvoluntaryQ/Enterprise standardsingle companyQB/T 2755industry-level,voluntary — aquality baseline,not a legalclearance
The prefix is the shortcut. QB/T 2755 is an industry-level, recommended standard — a shared quality convention rather than a regulatory hurdle. The one carpet-related requirement that is mandatory in China sits at national level, and it is a different standard entirely (GB 18587, section 4).

3. The 2005 → 2024 change almost nobody flags

Here is the detail that is missing from every English page we could find on this subject, and the one most likely to catch a buyer out: the 2005 edition has been replaced.

QB/T 2755-2024 “Block carpet was released on 10 December 2024 and took effect on 1 January 2026, superseding QB/T 2755-2005Carpet tiles”. The revision reorganises the requirements — broadly into internal quality and external quality — alongside the usual test methods, inspection rules, marking, packaging, transport and storage.

The practical consequence is simple. A supplier whose spec sheet or product page still cites QB/T 2755-2005 in 2026 is quoting a withdrawn edition. That is not necessarily a red flag on the product — it usually just means the documentation has not been refreshed — but it is a fair and revealing question to ask: which edition does your current test report cite, and can you send it? How promptly a supplier can answer tells you something about how they keep their paperwork.

We hold to the same test. Where we cite the standard, we cite the current 2024 edition, and if you are reading a document of ours that still says 2005, tell us — it means a page needs updating.

4. What the standard proves — and what it does not

Standards are deliberately narrow, and the narrowness is the useful part. A QB/T 2755 claim speaks to the physical product; it is silent on several things buyers often assume it covers.

 QB/T 2755 addressesIt does not address
ScopeClassification, physical requirements, test methods, inspection, marking & packagingIndoor-air emissions, fire performance or acoustic ratings
StatusVoluntary industry (light-industry) standardA mandatory national requirement
SubjectThe specific construction submitted and testedEvery SKU in the catalogue by default
EmissionsCovered separately by GB 18587, which is mandatory in China

That last row is the one to hold on to. If indoor-air quality matters to your project — and in an enclosed commercial interior it usually does — the document you want is GB 18587-2001, China's mandatory limit on harmful substances released from carpets, cushions and adhesives, or an internationally recognised emissions certificate. A QB/T 2755 line will not stand in for it. We cover reading an emissions certificate in detail in our Green Label Plus guide.

Modern office breakout with grey-and-green carpet tile laid in a clear modular grid, floor-to-ceiling windows and a city view
A carpet standard becomes useful the moment its documented construction can be tied to the material actually specified for a project — and paired with the separate emissions and fire evidence the space requires.

5. How it maps to the EN/ISO standards a Western spec uses

If you are specifying from Europe, the Middle East or Australia, your tender probably references EN or ISO standards rather than Chinese ones. QB/T 2755 does not map one-to-one onto them, so the cleanest approach is to treat each performance question as its own standard and ask for evidence against the one your project names.

QuestionChinaInternational benchmark a Western spec may cite
Product classification & requirementsQB/T 2755-2024EN 1307 — use-class classification by wear & appearance retention
Terminology / definitionsISO 2424 — textile floor-covering vocabulary
Indoor-air emissionsGB 18587 (mandatory)CRI Green Label Plus · an EPD · regional low-emission credits
Static / electrical resistanceISO 10965 — electrical resistance
Colourfastness to rubbingISO 105-X12 (cite the specific part, not "ISO 105")

A tidy specification pairs the Chinese product standard (QB/T 2755-2024) with the Chinese mandatory emissions standard (GB 18587) and cross-checks against whichever EN/ISO benchmarks the project references — then asks the supplier for a report against each named standard, not a single "meets all standards" line.

6. Where UNIJOY sits in this standard

We have a direct line to this document, and it is worth being precise about what that does and does not mean. UNIJOY's manufacturing predecessor, Shanghai Gaorong, was among the participating drafting units for QB/T 2755-2005, and Pei Hairong — our founder — was named as one of the principal drafters, on the standard's own preface list.

That is genuine background: it means the people who built our manufacturing operation were in the room when the industry wrote down how a carpet tile should be classified and tested. What it is not is a performance claim about any individual product. Helping draft a standard and meeting a project's emissions or fire requirement are separate things, evidenced separately — which is exactly the discipline this whole guide is arguing for.

7. Using a QB/T 2755 claim as a buyer

  1. Read the prefix. QB/T = voluntary industry standard, not a mandatory national one. Calibrate the weight you give the claim accordingly.
  2. Check the edition. The current edition is QB/T 2755-2024. A citation of the 2005 edition in 2026 is a withdrawn standard — ask for the current report.
  3. Match the report to the tile. Confirm the tested sample's construction — yarn, pile, backing, format — matches the exact SKU on your quotation.
  4. Ask for emissions separately. GB 18587 domestically, or Green Label Plus / an EPD internationally. QB/T 2755 does not cover it.
  5. List fire, static and colourfastness as their own requirements, each with its own named standard and report.
  6. Where a document doesn't match, ask rather than assume equivalence. A supplier who can hand you the right report for the right tile has answered the only question that matters.

The useful question is neverdoes the supplier mention a standard?It is can this supplier show which edition applies to this exact tile, and produce the separate evidence for everything the standard deliberately leaves out?Answer that, and a compliance line stops being marketing and becomes something you can rely on.

Frequently asked questions

Is QB/T 2755 a national standard?

No. QB/T identifies a Chinese light-industry standard, and the "/T" marks it as recommended — that is, voluntary. National standards carry the prefix GB (mandatory) or GB/T (recommended). So a "complies with QB/T 2755" line is conformance to a voluntary industry specification, not proof of regulatory clearance. It is a useful quality baseline, not a legal guarantee.

What is the current edition of QB/T 2755?

QB/T 2755-2024 "Block carpet", released on 10 December 2024 and effective from 1 January 2026, which replaced QB/T 2755-2005 "Carpet tiles". If a supplier's literature still cites the 2005 edition in 2026, they are quoting a withdrawn standard — worth a polite question about how current their documentation is.

Does compliance with QB/T 2755 mean the carpet is low-VOC?

No. Indoor-air emissions from carpet, cushion and adhesive are governed in China by a separate and mandatory standard, GB 18587. QB/T 2755 covers the product's classification, physical requirements and test methods, not its emissions. Ask for the emissions evidence as its own document — GB 18587 domestically, or CRI Green Label Plus / an EPD for an international project.

Does one QB/T 2755 report cover a supplier's whole catalogue?

Not by itself. A test result belongs to the specific construction that was tested — the yarn, pile, backing and dimensions. Ask whether the sample described in the report matches the exact tile on your quotation, rather than treating a single report as a blanket certificate for the range.

How does QB/T 2755 compare to EN 1307 or ISO standards?

They are not interchangeable. EN 1307 classifies carpet into use classes by wear and appearance retention; ISO 2424 is the terminology standard; ISO 10965 covers electrical resistance and ISO 105-X12 colourfastness to rubbing. QB/T 2755 is the Chinese product standard. A robust specification pairs the Chinese standards (QB/T 2755 for the product, GB 18587 for emissions) with the international benchmarks your project actually references, and asks for a report against each named standard.

Who drafted QB/T 2755-2005?

The 2005 edition was prepared by the carpet standardisation committee with a named list of participating drafting units and individual drafters. UNIJOY's manufacturing predecessor, Shanghai Gaorong, was among the participating units, and Pei Hairong was one of the principal drafters. That is background to how the document came about; it is not, on its own, evidence that any particular tile meets an unrelated emissions or fire requirement.

Sources & further reading

  1. 国家标准信息公共服务平台 (SAMR/SAC) — national & industry standards search
  2. Code of China — QB/T 2755-2024 "Block carpet" (supersedes the 2005 edition)
  3. Code of China — QB/T 2755-2005 "Carpet tiles" (superseded)
  4. China Certification — GB, GB/T and industry (QB/T) standards explained
  5. Code of China — GB 18587-2001 (mandatory limits for harmful substances from carpet)
  6. UNIJOY — technical documents, standards and test reports

Figures attributed to other manufacturers are their own published values, quoted for context. Different laboratories, sample build-ups and substrates are not directly comparable.